M-Audio Now Shipping Octane 8-Channel Mic Pre
 |
|
(Click for a close-up) |
February 29, 2004
M-Audio announced the availability of their new Octane, a professional
8-channel microphone preamplifier with ADAT Lightpipe output optimized for
multi-channel digital recording.
Each of the Octane's eight channels features the preamp
technology found in M-Audio's DMP3 mic preamp. Each channel features rear-panel connections for
microphone input (balanced XLR), direct line input (balanced 1/4" TRS), and
preamp output (balanced 1/4" TRS). The front panel also houses 1/4" TS
instrument inputs for channels 1 and 2. Additional front panel controls for
each of the eight preamp channels include input level knob, 20dB pad and
3-segment LED to aid in attaining the most favorable signal levels.
One of the most important features of the new Octane is the ADAT Lightpipe
output, allowing seamless digital connectivity of all eight channels to
multi-channel digital equipment such as ADATs and digital mixers. Two word
clock connectors (BNC) provide synchronization with other digital devices,
including multiple Octanes for as many high-end preamp channels as desired.
Internal sync rates are selectable between 44.1kHz and 48kHz, and the unit
slaves to external sync rates ranging from 33kHz to 59kHz. Of course, the
individual preamp outs on each channel also allow connection to any type of
analog mixer or recorder with 1/4" line inputs. The line inputs allow the
Octane to serve as an 8-channel A/D converter, as well.
The Octane also offers a number of other advanced features. +48 volt phantom power is switchable from the
front panel for channels 1-4 and channels 5-8, respectively. A phase reverse
switch is available on every other channel, handy for stereo miking
applications. Channels 7 and 8 feature the option of M-S matrix encoding
complete with width control, bringing this advanced stereo recording
technique within the grasp of the average recordist. Channel 1 also offers a
12dB/octave low-cut filter at 80Hz to aid in eliminating rumble.
This 2U rack unit also boasts 24-bit
resolution throughout the signal chain. The Octane delivers impressive
signal-to-noise ratio and dynamic range--133dB for instrument inputs and 120dB for microphone
inputs. Frequency response is 20Hz to 20kHz for all inputs (+/- 0.11 dB at
mid gain for mic inputs, +/- 0.03 dB at mid gain for instrument inputs).
Octane is currently shipping at an MSRP of $749.95.
For more information, visit their web site at www.m-audio.com. | 
