Mackie Introduces New Active Sound Reinforcement Loudspeaker
 |
| SRM1530 |
July 22, 2000Mackie Designs Inc. announces the introduction of the new SR1530 active sound reinforcement loudspeaker. The SR1530 employs several new proprietary technologies which combine to yield an exceptional price/performance ratio.
The SR1530 is a three-way, tri-amplified, horn loaded, active system designed for high definition and extreme output levels. RCF precision components of the SR1530 include a 15-inch woofer with inside/outside high temperature coil technology, a high-output, horn loaded 6-inch midrange speaker, and a one-inch exit compression driver mounted on a wide dispersion, extreme output high/mid horn design.
The SR1530 is powered by a unique, integrated three-channel amplifier module that generates 500 watts of total power. Integrated electronics also feature active time correction and phase alignment, electronic equalization, and electronic system and component protection circuitry. The SR1530 also includes a single line level control.
Mackie engineered the SR1530 trapezoidal cabinet to withstand "Leona Helmsley" levels of roadie and rental company abuse. How? First, Mackie molds the top and bottom of the enclosure using a high-impact resistant composite resin. The front, back and sides are constructed of heavy duty, multi-ply laminated wood used by fine cabinetmakers and in expensive hi-fi speaker systems. SR1530 are correctly weight-balanced for stable stand-mounting, two large grip side handles, plus top and bottom handles provide for optimal portability, set-up, and repositioning.
At only $1199 US Suggested Retail, the SR1530 once again demonstrates Mackie's prowess in pushing radically new levels of affordable quality into the professional audio market.
SR1530 Product Specifications:
Transducer Specifications:
- Low Frequency Transducer
- Diameter: 381mm (15")
-
Sensitivity: 98dB
-
Nominal Impedance: 3 Ohms
-
Power Handling: 300 watts
-
Frequency Response: 40Hz - 1,000 Hz
-
Mid Frequency Transducer
- Diameter: 152.4mm (6.0")
-
Sensitivity: 103 dB
- Nominal Impedance: 6 Ohms
-
Power Handling: 150 watts
-
Frequency Response: 400Hz - 5,000 Hz
-
High Frequency Transducer
- Diaphragm Diameter: 25.4mm (1")
-
Sensitivity: 104 dB
-
Nominal Impedance: 8 Ohm
-
Power Handling: 100 watts
-
Frequency Response: 1,000 - 20,000Hz
Power Amplifier and System Specifications:
- Low Frequency Power Amplifier
- Rated Power: 300 watts
-
Rated Load Impedance: 3 Ohms
-
Rated THD: <0.1%
- Cooling: Convection, Extrusion
-
Mid Frequency Power Amplifier
- Rated Power: 100 Watts
- Rated Load Impedance: 6 Ohms
-
Rated THD: <0.1%
-
Cooling: Convection, Extrusion
-
High Frequency Power Amplifier
- Rated Power: 100 Watts
- Rated Load Impedance: 8 Ohms
- Rated THD: <0.1%
- Cooling: Convection, Extrusion
-
System Specifications
- Input Type: Balanced or Unbalanced
-
Input Impedance: Line - 20K Ohm
-
Input Protection: Level Protected
-
Sensitivity: Line -15dB
-
Maximum Input Level: Line +28 dBu
-
Thermal Protection: Via Thermo Switch
-
Muting: Occurs in protection mode
-
Acoustic Frequency Response: 55Hz - 18,000 Hz
-
Maximum SPL @ 1 Meter: 125 dB
-
Peak Output @ 1 Meter: 128 dB
-
High Freq. (HF) Crossover Type: 12dB/Octave
-
HF Crossover Frequency: 3,000 Hz
-
Mid Freq. (MF) Crossover Type: 24dB/Octave
-
MF Crossover Frequency: 400 Hz
- Line Input Power
- US: 115V / 60Hz
-
Europe: 230V / 50Hz
-
Physical Properties
- Height: 42" (106.7 cm)
- Width: 19" (48.3 cm)
- Depth: 18" (45.7 cm)
-
Weight: 98 lbs. (44.5 kg)
Mackie Designs is exhibiting at the Summer NAMM Expo, Nashville Tennessee. Check MACKIETONE.COM for information about Mackie's offsite product demonstrations at SOUNDCHECK STUDIOS, located only ten minutes from the convention center.For more Mackie product information please contact:
Mackie Designs Inc.
16220 Wood-Red Road N.E.
Woodinville, WA 98072
Phone: (425) 487-4333
Fax: (425) 487-4337
Internet: www.mackie.com |
