---

PowerMode Series Amps Added to PVDJ Line

PowerMode 4 (Click for a close-up)

PowerMode 3000 (Click for a close-up)

PVDJ, a division of Peavey, introduces the PowerMode Series power amplifiers, including the PowerMode 4, a versatile four-channel amp operable in parallel, bridged, stereo two-way and subwoofer modes.

The two-rack-space PowerMode 4 features four power amps rated to deliver 180 watts each into four 8-ohm speakers, with an input section that offers numerous system hookup configurations. All four channels will operate full range or in stereo two-way or bridged modes, while channels 1 and 2 will also operate in parallel. Channels 3 and 4 have an 800-watt subwoofer output that enables a low-pass filter to drive frequencies below 120 Hz to a subwoofer (channels 1 and 2 run full range when this mode is engaged; channels 3 and 4 are bridged).

Both channels on the PowerMode 3000 and 2000 include a variable crossover, variable low-pass filter and an amp function switch that switches from highs, lows or full range. On all PowerMode amps, the front panel display includes LED indicators for signal presence and DDT active, as well as individual power LEDs that indicate fault conditions. They also feature circuitry to protect against shorts, improper loads, overdriven turn-on levels, high temperatures, DC and subsonic frequencies that could damage loudspeakers.

To ensure cool operating temperatures, the PowerMode 2000 includes two dual-speed cooling fans; the PowerMode 3000 has two variable-speed cooling fans; and the PowerMode 4 has one variable-speed cooling fan. These amps ship with XLR-1/4" combination inputs; IEC mains connector, Speakon and binding post (2000 and 3000 models only) outputs; and our strong five-year warranty.

PowerMode Series amplifiers will be available in Q3 2005 from authorized PVDJ retailers.

PowerMode 4

• Parallel, bridged, stereo two-way and subwoofer operation modes
• Rated Power two channels bridged 4 ohms, 825 watts; 1 kHz @ <0.1% T.H.D.
• Rated Power (2 x 2 ohms) 500 watts @ 1 kHz @ <0.1% T.H.D.
• Rated Power (2 x 4 ohms) 350 watts @ 1 kHz @ <0.05% T.H.D.
• Rated Power (2 x 8 ohms) 200 watts @ 1 kHz @ <0.05% T.H.D
• Rated Power (4 x 2 ohms) 400 watts per channel @ 1kHz <0.1% THD both channels driven
• Rated Power (4 x 4 ohms) 300 watts per channel @ 1kHz <0.1% THD both channels driven
• Rated Power (4 x 8 ohms) 180 watts per channel @ 1kHz <0.1% THD both channels driven
• Frequency response: 10 Hz to 20 kHz; +0, -1dB at 1 watt Weight 38.3 lbs. (2RU)
• U.S. MSRP $999.99

PowerMode 3000

• Built-in crossover variable from 40 to 300 Hz
• Variable low-cut filter from 20 to 100 Hz
• Rated Power bridged 4 ohms, 3050 watts; 1 kHz @ <0.1% T.H.D.
• Rated Power (1 x 2 ohms) 2125 watts @ 1 kHz @ <0.1% T.H.D.
• Rated Power (1 x 4 ohms) 1400 watts @ 1 kHz @ <0.05% T.H.D
• Rated Power (1 x 8 ohms) 825 watts @ 1 kHz @ <0.05% T.H.D
• Rated Power (2 x 2 ohms) 1500 watts per channel @ 1kHz <0.1% THD both channels driven
• Rated Power (2 x 4 ohms) 1100 watts per channel @ 1kHz <0.1% THD both channels driven
• Rated Power (2 x 8 ohms) 700 watts per channel @ 1kHz <0.1% THD both channels driven
• Frequency response: 10 Hz to 100 kHz; +0, -1dB at 1 watt
• Weight 43 lbs. (2RU)
• U.S. MSRP $1149.99

PowerMode 2000

• Built-in variable crossover from 40 to 300 Hz
• Rated Power bridged 4 ohms, 2100 watts; 1 kHz @ <0.1% T.H.D.
• Rated Power (1 x 2 ohms) 1325 watts @ 1 kHz @ <0.1% T.H.D.
• Rated Power (1 x 4 ohms) 825 watts @ 1 kHz @ <0.05% T.H.D
• Rated Power (1 x 8 ohms) 500 watts @ 1 kHz @ <0.05% T.H.D
• Rated Power (2 x 2 ohms) 1000 watts per channel @ 1kHz <0.1% THD both channels driven
• Rated Power (2 x 4 ohms) 700 watts per channel @ 1kHz <0.1% THD both channels driven
• Rated Power (2 x 8 ohms) 425 watts per channel @ 1kHz <0.1% THD both channels driven
• Frequency response: 10 Hz to 25 kHz; +0, -1dB at 1 watt
• Weight 42 lbs. (2RU)
• U.S. MSRP $979.99

For more information, visit their web site at http://www.peavey.com/.

Recent Peavey headlines

• Peavey Electronics Chooses Waves MaxxAudio Sound Enhancement Technology for its IPR Series Power Amplifiers (2009-11-05)
• Peavey Revalver™MK III RTAS Version Released As Free Upgrade (2009-05-15)
• Peavey Electronics Celebrates 44Th Birthday (2009-05-15)
• Peavey Ships Tube-Powered VYPYR™ Modeling Amplifiers (2009-04-28)
• Peavey Introduces Compact, Pro Euro Series&Trade; Enclosures (2009-03-24)
• Peavey EXPANDS Award-winning Custom Shop to DEBUT HAND-BUILT Amplifiers (2009-03-13)
• Delta Music Institute Opens With Peavey Endowment (2009-03-10)
• Peavey Expands HP™ Special Guitar Series With New Stoptail Models (2009-01-20)
• Peavey Offers New Cirrus™ Series Rudy Sarzo Signature Model (2009-01-20)
• Peavey Introduces 6505® Plus Guitar Amplifier In 1X12 Combo (2009-01-19)

More Peavey Headlines

Similar Products at Musician's Friend

• Radial Tonebone Headbone TS Switcher for Tube to Solid State Amps
• Ampeg SVT-2 Pro Series Amp Head
• Marshall 5-Button Footswitch for TSL Series Amps
• Markbass F Series Amp Head Bag
• Genz Benz Shuttle Series Amp Head Carrying Case
• Markbass F Series Amp Head Bag - Used
• Randall G3 Plus Series RH300G3PLUS 300W Guitar Amp Head
• Line 6 Spider IV HD150 150W Guitar Amp Head
• Blackstar HT Series HT-5H 5W Tube Guitar Amp Head
• Marshall JVM Series JVM205H 50W Tube Guitar Amp Head